SAFETY
Version: G/14/6/21/1 Safety 9
SAFETY
Robots execute quick movements in the individual axes, which can lead to dangers of accident
for persons.
To protect personnel against potential dangers, robots come equipped with the appropriate
safety equipment.
DANGER!
Safety equipment must not be modified or be put out of function! Check
the safety equipment before the operation of the machine.
When a safety equipment defect is detected:
1. Stop machine operations and switch the motors OFF.
2 Do not carry out any further activity on the robot.
3. Immediatly contact in-house personnel responsible for equipment safety.
4 Resume machine operations only after the functionality of the safety equipment is
guaranteed.
DANGER!
During the operation the movement area of the robot
must not be entered and not be reached into it by no means!
The working and the stay below moving components and/or under float-
ing loads is forbidden!
This state is valid in all modes of operation, even when the robot is
switched off. There is mortal danger!
During work on the injection molding machine/on the robot or within the safety guarding you
must move the robot into a protected position.
CAUTION!
Caution must be used during machine set-up and operation, as incor-
rect settings can lead to equipment damage.
Settings must be compatible to the function of the machine, mold, mate-
rial and peripheral units.
ENGEL is not liable in respect to operational errors.
Additional safety hints found throughout this manual must be observed.
ENGEL
instruction manual - robot
