CAD2D3D

% 150 9001 Registered DAQ Cards Our DAQ F/T System works with DAQ cards we specify or with differentially-ended or single-ended analog inputs on your DAQ hardware; however, differentially- ended inputs are preferred for the best noise immunity. Note: The DAQ F/T outputs amplified, conditioned strain gage signals to a data acquisition cardnot the resolved force and torque data. ATI software (included) running on the host computer performs computations to convert the strain gage voltage data into force/torque data. You must acquire all six strain gage channels in order to calculate any of the forces and torques. ATI Supports the Following Bus-Types: e PCI e PC| Express e CompactPCl e PC Card (PCMCIA) USB Contact ATI regarding other bus-types. Most bus-types are available in 16-bit resolution. Note: Most laptop computers and PC Card (PCMCIA) peripherals do not have provisions for proper signal grounding. External grounding may be necessary to reduce some of the resulting additional noise. DAQ F/T System Power Supply or Interface Power Supply (For Nano/Mini Transducers) Transducer = =) Transducer Cable fi? INDUSTRIAL AUTOMATION DAQ Software ATI provides DAQ F/T software components that you can use to build your application as well as a sample application program. The software components include an ActiveX server, a C library and a .NET Assembly described below. Software Component Features The .NET Assembly ATICombinedDAQFT is a Windows .NET Assembly that performs the core operations of the DAQ F/T system, including: e |oading calibration files. e configuring the transducer system, including tool transformations. e reading and converting transducer signals from NI-DAQmx-compatible DAQ systems into forces and torques. ATICombinedDAQFT can be used in any development environment that supports .NET. For non-Windows operating systems, and DAQ cards not supported by NI- DAQmx, ATl provides a C library and ActiveX Server which perform system configuration, and calculate F/T values from voltages read from your DAQ system. Application Program The Windows DAQ F/T application program displays graphical and numerical force and torque output for Windows 2000 and later Windows operating systems. Visual Studio 2003 source code is provided as an aid in creating additional application programs. This program only works with NI-DAQmx-compatible boards. Power Supply DAQ Card PCL PCMCIA, cPCI or USB VISIT WWW.ATI-IA.COM FOR CURRENT PRODUCT SPECIFICATIONS, 2-D DRAWINGS, AND 3-D CAD MODELS 5