OMEGA331 产品优势 Product Advantages
IE 一 一
Product Advantages
Extremely High Strength:
e EDM wire-cut from high yield-strength stainless steel.
e Maximum allowable single-axis overload values are 5.3 to 21.8
times rated capacities.
High Signal-to-Noise Ratio: Silicon strain gages provide a signal 75
times stronger than conventional foil gages. This signal is amplified,
resulting in near-zero noise distortion.
IP65 Version Available: The |[P65 version of the transducer provides
protection against water spray. Contact AT Industrial Automation for
drawings and more information.
Typical Applications
e Product testing e Force feedback
e Telerobotics
SENSING RANGES Calibrations
The Omega331 F/T transducer
The transducer is made of hardened stainless steel,
and the tool and mounting adapters are made of high-
strength stainless steel.
AVES US-2250-13000 US-4500-26000 US-9000-52000
Fz (十 lbf)
Tx, TY (十 |bf-im) 13000 26000 52000
Tz (£Ibf-in)
RESOLUTION System Type*
Axes GiL Net/DAO
Fx, Fy (lbf)
ENGLISH CALIBRATIONS
Net/DAQ
Fz (Ibf)
Tx, Ty (Ibf-in)
Tz (Ibf-in)
SENSING RANGES Calibrations
Axes SI-10000-1500
Fx, Fy (=N)
S1-20000-3000
SI1-40000-6000
Fz (£N) 22000 44000 88000
Tx, Ty (£Nm)
Tz (=Nm)
RESOLUTION System Type*
Axes @it Net/DAQ
Fx, Fy (kN) 1/240 1/480
METRIC CALIBRATIONS
1/120
6000
Net/DAQ
1/240
Net/DAQ
1/120
1/60
Fz (kN) 1/120 1/240 1/60 1/120 1/30 1/60
Tx, Ty (kNm) 3/4000 3/8000 3/2000 3/4000 3/1000 | 3/2000
Tz (kNm) 3/8000 3/16000 3/4000 3/8000 3/2000 | 3/4000
*CTL: Controller F/T System; Net: Net F/T System; DAQ: 16-bit DAQ F/T System The resolution is typical for most applications and can be improved with filtering.
Resolutions quoted are the effective resolution after dropping four counts of noise (Net/DAQ) or eight counts of noise (CTL). All sensors calibrated by ATI.
Applied loads must be within range in each of the six axes for the F/T sensor to measure correctly (refer to the transducer manual for complex loading information).
40 VISIT WWW.ATI-IA.COM FOR CURRENT PRODUCT SPECIFICATIONS, 2-D DRAWINGS, AND 3-D CAD MODELS
