CAD2D3D

19S Huzhou Sanjing国画 Cryogenic Equipment Co., Ltd. 低温离心泵性能参数表Table of Cryogenic Centrifugal Pump Performance Parameters流量 | 扬程 | 转速本 2| 26| 闪 RRdOMI型号 Flow | Head |Speed : i 进口出口Model N, [ LO, [ LAr LNG jgfeg| NPSHr| inlet outletmas/h m r/min kW % m mmSLP-13/130 13 | 130 | 2940 22 38 | 20 50 40SLP-24/60 24 60 | 2935 11 60 | 23 65 5024 70 60 | 2.3 65 502935 18.5 1124 90 54 | 20 65 50SLP-24/9024 | 110 |3150 54 | 22 65 5029 1124 | 134 |3350 55 | 2.8 65 5040 70 2 | 22 30 |22 |W6r | |5SLP-40/90 40 90 2940 | 22 | 30 30 122767\ (15 80 5060 85 22 | 30 37 | 22 | 61 15T60 | 129 37 | 55 75 | 22 |50.5| 1.3SLP-80/120 80 120 |2950 | 55 | 75 75 | 30 |54.5| 1.9 100 50100 | 105 55 | 75 9 | 37 | 53| 2790 | 145 55 | 75 9 | 30 | 60| 28120 | 135 75 | 90 | 110 | 37 | 66 | 34SLP-120/135 150 | 127 [2950 | 75 | 90 | 132 | 37 | 68 | 4.2 100 80120 | 135 75 | 90 | 110 | 37 | 66| 34150 | 127 75 | 90 | 132 | 37 | 68| 4.220 | 280 37 | 55 75 | 185 | 38 | 14SLP-25/270 25 | 270 |2950 | 45 55 75 | 22 40| 1.8 100 5030 | 256 45 75 75 | 22 | 41 1.940 | 270 55 75 9 | 30 | 45| 14SLP-50/250 50 | 250 |2950| 75 90 110 | 30 | 47 | 18 100 5060 | 240 75 110 132 | 37 | 48| 19 注 : 表内参数为我公司标准产品，如需定制，请咨询技术部 : 0572-2287769Note: the above parameters are for our standard products. Please consulif you need custom-made products. It the Technology Department: 0572-2287769ZRMBEFORMulti-phase Cryogenic Centrifugal Pumps适用范围 Applicability@ 空分工艺流程@ 空分后备系统@ 工业气体供气系统@ 低温液体卸车装车@Airseparatbn process fbw@Airseparatbn backup system© Industrialgas supply system@ Cryogenic liquid unbading and bading 主要技术参数 Main technical parameters@ 流量 10-80maz/h@ 扬程 : 220-350m@ 转速 : 2650-3600rmin© F bw :10-80m 3h© Head:220-350m© Speed:2650-3600r/m in 性能特点 Performance features@ 低速设计，机组运转更稳定@ 结构紧凑、简单@ 根据不同工况配置迷宫密封或唇式密封，连续工作时间可达 8000h 以上@ 蜗达、叶轮采用高性能铜合金，保证在液氧工况下的安全@ 高强度低温不锈钢轴@ 叶轮、转子经过静、动平衡试验，保证了转子的稳定性@ 选用变频调速电机使泵的运行范围更广@ 进、出液法兰配有桑性连接及进液过滤器，管路震动小，运行稳定@ Low speed design and more stable unit operation© Compact and simple structure© Labyrinth seal or lip seal is configured according to different working conditions. The continuous working timecan reach more than 8000h.© The volute and the impeller are made of high performance copper alloy to ensure the safety under the condi-tion of liquid oxygen.© High-strength low—temperature stainless steel shaft® The impeller and the rotor are subject to static and dynamic balance tests, so as to ensure the stability of therotor.O A variable-frequency and variable—speed motor is used to make the pump operating range wider.© The inlet and outlet flanges are equipped with flexible connections and inlet filters, the pipelinevibration is small and the operation is stable. 20