底部装车 A型框架式装车臂
OPW> BOTTOM
ENGINEERED SYSTEMS
a I, company
“A" Frame Loader
M-32-F
The “A” Frame is one of the more popular load-
ing arm configurations. It provides good flexibility,
long reach, and is convenient and easy to use.
It adjusts for any changes in the elevation or tilting
of the vehicle during loading or unloading. The arm
stores neatly in the upright, near-vertical position,
allowing it to swing around easily for loading
from either side of the island.
The “A” Frame's compact storage envelope also
allows these arms to be installed relatively close
together, often on risers that are approximately the
same height as the vehicle connection. They can
also be mounted next to one another on staggered
risers to achieve arm crossover for simultaneous
loading of multiple compartment trucks.
Commonly used for tank-truck bottom loading,
“A” Frame arms also can be used in top-loading
and unloading installations. They are generally
equipped with a dry-disconnect coupling, union,
or other tight-fill fitting.
300-pound inlet flange and seamless piping are
suitable for handling liquefied petroleum gases,
including propane and butane.
Benefits
* Easily stored away from vehicles Overhead
View
* For multiple product applications, it can be
mounted close to another arm
* Can be stored safely to ensure safe
clearance of vehicles
* Crossover easily can be achieved
Features
* Low riser mounting height
® Available in 2", 3" and 4"
* Available in steel, stainless steel, aluminum
and specialty alloys
* Choice of flanged, threaded or all-welded
construction
* LPG service arms (LPG-32-F): all-welded
construction
* Welded assemblies in steel and stainless steel L
with 300-Ib. flanges i 7 ,‘
Dimensions*
Size A
i mm
60
60
60
1524
1524
1524
60
60
60
1524
1524
1524
206
10-3/4 273
12-3/4 324
858 219
3" 76 |10-12 267
11-3/4 298
*Custom dimensions also available.
opw-es.com
